Shop | Profiles, Brackets, Panels, and more

Product Category

Cut to
Brand
- Avrex (13)
- Bosch (53)
- Dorner (14)


Tie-wrap block, N10, low profile ~~2.07 CAD~~ 2.07 CAD 2.07 CAD	Detent spring n8/n10 transp. ~~0.74 CAD~~ 0.74 CAD 0.74 CAD	Panel support profile N10 L=2000mm, Grey ~~10.34 CAD~~ 10.34 CAD 10.34 CAD	Slot profile N8, L=2000mm, Grey ~~9.02 CAD~~ 9.02 CAD 9.02 CAD
Variofix block N10, grey ~~4.12 CAD~~ 4.12 CAD 4.12 CAD	Leveling foot D44 M12x85 ~~18.26 CAD~~ 18.26 CAD 18.26 CAD	Base plate 45x45, steel ~~32.97 CAD~~ 32.97 CAD 32.97 CAD	Base plate 45x90, steel (pied) ~~62.69 CAD~~ 62.69 CAD 62.690000000000005 CAD
Caster wheel with brake D80 F ~~39.23 CAD~~ 39.23 CAD 39.230000000000004 CAD	Hinge, PA, 30/30, grey, pair ~~14.10 CAD~~ 14.10 CAD 14.1 CAD	Hinge, PA, 45/45, grey ~~16.47 CAD~~ 16.47 CAD 16.47 CAD	Complete Conveyor, 12" x 4' long, 2200 "End-Drive", Pos. A ~~7,545.00 CAD~~ 7,545.00 CAD 7545.0 CAD
Complete Conveyor, 12" x 6' long, 2200 "End-Drive", Pos. A ~~0.00 CAD~~ 0.0 CAD	Complete Conveyor 12" x 8' long, 2200 "End-Drive" Pos. A ~~0.00 CAD~~ 0.0 CAD	Complete Conveyor 6" x 4' long, 2200 "End-Drive" Pos. A ~~6,580.00 CAD~~ 6,580.00 CAD 6580.0 CAD	Complete Conveyor 6" x 6' long, 2200 "End-Drive" Pos. A ~~0.00 CAD~~ 0.0 CAD
Complete Conveyor 6" x 8' long, 2200 "End-Drive" Pos. A ~~0.00 CAD~~ 0.0 CAD	6" wide x 4' long, 2200 Series End Drive conveyor with V-guide belt tracking, drive shaft in position A with type 01 low side profile on both sides and belt type 02 general purpose, with fused finger splice. Configuration includes standard drive tail and standard idler tail, mounting brackets and belt return rollers. Uncrated weight = 6.3kg (13.8lb) ~~0.00 CAD~~ 0.0 CAD	2200 Series Light Load Parallel Shaft gearmotor Bottom mount package for a 6" wide End Drive conveyor, mounted in the A position, 28:28 pulley ratio ~~0.00 CAD~~ 0.0 CAD	12" wide x 4' long, 2200 Series End Drive conveyor with V-guide belt tracking, drive shaft in position A with type 01 low side profile on both sides and belt type 02 general purpose, with fused finger splice. Configuration includes standard drive tail and standard idler tail, mounting brackets and belt return rollers ~~0.00 CAD~~ 0.0 CAD